Kia Cadenza: Tires and wheels / All season tires. Summer tires. Snow tires
All season tires
Kia specifies all season tires on some models to provide good performance for use all year round, including snowy and icy road conditions. All season tires are identified by ALL SEASON and/or M+S (Mud and Snow) on the tire sidewall. Snow tires have better snow traction than all season tires and may be more appropriate in some areas.
Summer tires
Kia specifies summer tires on some models to provide superior performance on dry roads. Summer tire performance is substantially reduced in snow and ice. Summer tires do not have the tire traction rating M+S (Mud and Snow) on the tire side wall. If you plan to operate your vehicle in snowy or icy conditions, Kia recommends the use of snow tires or all season tires on all four wheels.
Snow tires
If you equip your car with snow tires, they should be the same size and have the same load capacity as the original tires. Snow tires should be installed on all four wheels; otherwise, poor handling may result.
Snow tires should carry 4 psi (28 kPa) more air pressure than the pressure recommended for the standard tires on the tire label on the driver's side of the center pillar, or up to the maximum pressure shown on the tire sidewall, whichever is less.
Do not drive faster than 75 mph (120 km/h) when your vehicle is equipped with snow tires.
Tire sidewall labeling
This information identifies and
describes the fundamental characteristics
of the tire and also provides
the tire identification number (TIN)
for safety standard certification. The
TIN can ...
Tire chains
Tire chains, if necessary, should be
installed on the front wheels.
Be sure that the chains are installed
in accordance with the manufacturer's
instructions.
To minimize tire and chain wear, d ...
Other information:
Kia Cadenza YG 2016-2024 Service Manual: Body Control Module (BCM) Schematic Diagrams
Circuit Diagram ...
Kia Cadenza YG 2016-2024 Service Manual: CVVT (Continuously Variable Valve Timing) System Description and Operation
Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated by the engine speed and load. By controlling CVVT, the valve over-lap or under-lap occurs, which m ...
