Kia Cadenza: Cooling System / Cooling Fan Components and Components Location

Kia Cadenza YG 2016-2024 Service Manual / Engine Mechanical System / Cooling System / Cooling Fan Components and Components Location

Components

1. Cooling fan
2. Fan motor
3. Fan shroud
4. Resistor

Coolant Repair procedures
Replacement And Air Bleeding     Never remove the radiator cap when the engine is hot. Serious scalding could be caused by hot fluid under high pressure escaping from ...

Cooling Fan Description and Operation
Description [Air conditioning type] The cooling fan operates in 2 stages (HIGH/LOW). The engine control module (ECM) controls the cooling fan according to the coolant temperature, vehicle spe ...

Other information:

Kia Cadenza YG 2016-2024 Service Manual: TPMS Sensor Description and Operation


Description 1. Mode (1) Configuration State • All sensors should be in the Low Line state. • In High Line configuration, sensor transmissions occur every 1 minute (nominal) and pressure is measured every 4 seconds. (2) Normal Delayed Auto State • This is H ...

Kia Cadenza YG 2016-2024 Service Manual: Engine Room Under Cover Repair procedures


Removal and Installation 1. Remove the engine room front under cover (A) and the side covers (B).     When removing the under covers (B), unfasten the mounting bracket bolts and then remove the under cover and mounting bracket assembly. 2. Install in the reve ...

Copyright © www.kcadenzavg.com 2017-2024