Kia Cadenza: Driving your vehicle / Navigation-Based Smart Cruise Control
(NSCC)
Navigation-based Smart Cruise
Control will help automatically adjust
your speed when a curved road is
ahead by receiving road information
from the navigation while the Smart
Cruise Control is operating.
WARNING
- Navigation-based Smart
Cruise Control is not a substitute
for safe driving practices,
but a convenience function. It
is the responsibility of the driver
to always be aware of the
surroundings and drive safely.
- Navigation-based Smart
Cruise Control relies entirely
on the road information provided
by the navigation system
and may accelerate above
speed limit. It is the responsibility
of the driver to follow
traffic laws and avoid accidents.
- For your safety, please read
the owner's manual before
using the system.
✽ NOTICE
• Navigation-based Smart Cruise
Control is available only on controlled
access road of certain highways.
❈ Controlled access road indicates
roads with limited entrances
and exits that allow uninterrupted
high speed traffic flow.
Only passenger cars and motorcycles
are allowed on controlled
access roads.
.jpg)
• Additional highways may be
expanded by navigation updates.
Some vehicles ahead in your lane
cannot be recognized by the sensor
as follows:
- Narrow vehicles such as motorcycles
or bicycles
- Vehicles offset to one side
- Slow-moving vehicles or s ...
System setting
With the Engine Start/Stop button
in the ON or START position,
Navigation-based Smart Cruise
Control can be activated by selecting
'Driver Assistance → Driving
Assi ...
Other information:
Replacements
Movable glass Replacement
1.
Open the movable glass fully.
2.
Remove the folding cover (A).
3.
After loosening the mounting screws, then remove the movable glass (A).
•
Do not damage the screws.
4.
Installation is the reverse o ...
General
1.
Basically, all measurements in this manual are taken with a tracking gauge.
2.
When a measuring tape is used, check to be sure there is no elongation, twisting or bending.
3.
For measuring dimensions, both projected dimension and actual-measurement dimension are used in thi ...