Kia Cadenza: Seat Belt Pretensioner / Seat Belt Pretensioner (BPT) Description and Operation
The Seat Belt Pretensioners (BPT) are installed inside Center
Pillar (LH & RH). When a vehicle crashes with a certain degree of
frontal impact, the pretensioner seat belt helps to reduce the severity
of injury to the front seat occupants by retracting the seat belt
webbing. This prevents the front occupants from thrusting forward and
hitting the steering wheel or the instrument panel when the vehicle
crashes.
Never attempt to measure the circuit resistance of the Seat
Belt Pretensioner (BPT) even if you are using the specified tester. If
the circuit resistance is measured with a tester, the pretensioner will
be ignited accidentally. This will result in serious personal injury. |
Other information:
Inspection
Front Seat Heater Switch
1.
Disconnect the negative (-) battery terminal.
2.
Remove the floor console upper cover (A).
(Refer to Body - "Console")
3.
Remove the seat heater switch connector (A) from the floor console upper cover.
4.
Operate each seat heater switch and ch ...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the CCV connector.
3.
Measure resistance between the CCV terminal 1 and 2.
4.
Check that the resistance is within the specification.
Specification: Refer to "Specification"
5.
Disconnect the vapor hose connected with ...