Kia Cadenza: Smart key System / Specifications

Kia Cadenza YG 2016-2024 Service Manual / Body Electrical System / Smart key System / Specifications

Specification

Smart Key Unit

Items	Specification
Rated voltage	DC 12V
Operating voltage	DC 9 ~ 16V
Operating temperature	-30°C ~ 75°C (-22°F ~ 167°F)
Dark current	Max 2.9mA (When welcome light function on : Max 4.9 mA)

RF Receiver

Items	Specification
Frequency	315 MHz
Antenna type	FSK (Frequency Shift Keying)

Smart Key FOB

Items

Specification

Battery

Lithium battery 3V 1EA (CR2032)

Distance

30m from vehicle, RF : 30m, Passive(LF) : 0.7m

Battery life

More than 2years (10 times / a day)

An inappropriately disposed battery can be harmful to the environment and human health.

Dispose the battery according to your local law(s) or regulation.

Push buttons

4 (Door lock / unlock, Trunk lid open, Panic)

Frequency(Rx)

125 kHz

Frequency(Tx)

315 MHz

Numbers

2EA

Antenna

Items	Specification
Rated voltage	DC 12V
Operating voltage	DC 9 ~ 16V
Operating temperature	-30°C ~ 75°C (-22°F ~ 167°F)
Frequency	125kHz
Numbers	Interior(3EA), Door(2EA), Bumper(1EA)

Smart key System

...

Components and Components Location

Component Location (1) 1. Buzzer2. Smart key unit3. RF receiver4. Interior antenna 15. Interior antenna 26. Trunk antenna7. Bumper antenna Component Location (2) 1. Door outside handle & ...

Other information:

Kia Cadenza YG 2016-2024 Service Manual: Blind Spot Detection Unit Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear bumper. (Refer to Body - "Rear Bumper") 3. Remove the BSD unit (A) after loosening the mounting screws. Take care not to separate the bracket from rear bumper when removing the BSD ...

Kia Cadenza YG 2016-2024 Owners Manual: Blind-Spot View Monitor (BVM)

Blind-Spot View Monitor displays the rear and side views of the vehicle on a center cluster screen upon the driver’s activation of the turn signal. To turn on BVM : Under condition BVM is enabled in the settings (1) The Engine Start/Stop button is turned to the ON position. (2) The ...