Kia Cadenza: Heater / Temperature Control Actuator Description and Operation

Kia Cadenza YG 2016-2025 Service Manual / Heating,Ventilation, Air Conditioning / Heater / Temperature Control Actuator Description and Operation

Description
1.
Heater unit includes mode control actuator and temperature control actuator.
2.
Temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. Signal from control unit adjusts position of temperature door by operating temperature switch and then temperature will be regulated by the hot/cold air ratio decided by position of temperature door
Temperature Control Actuator Components and Components Location
Component Location ...

Temperature Control Actuator Repair procedures
Inspection 1. Ignition "OFF" 2. Disconnect the connector of temperature control actuator. 3. Verify that the temperature control actuator operates to the hot position when connecting 12 ...

Other information:

Kia Cadenza YG 2016-2025 Service Manual: SS-A Solenoid Valve(ON/OFF) Description and Operation


Description • SS-A solenoid valve is ON/OFF type. • When TCM supplies variable current to solenoid valve, speed range is changed by operating the solenoid valve. SS-A Solenoid Valve operation table SS-AN, P●1Δ234 5 6 R● ● : Connected status Δ : C ...

Kia Cadenza YG 2016-2025 Service Manual: Description and Operation


Description Tread Lamp – Tire Under Inflation / Leak Warning. 1. Turn on condition • When tire pressure is below allowed threshold • When rapid leak is detected by the sensor. 2. Turn off condition • Under-inflation ; When tire pressure is above ...

Copyright © www.kcadenzavg.com 2017-2025