Kia Cadenza: Brake system / Auto hold
The Auto Hold maintains the vehicle
in a standstill even though the brake
pedal is not depressed after the driver
brings the vehicle to a complete
stop by depressing the brake pedal.
If there is a problem with the brake
pedal while driving, emergency braking
is possible by pulling up and
holding the EPB switch. Braking is
possible only while you are holding
the EPB switc ...
1. With the driver's door, engine
hood closed, fasten the driver's
seat belt or depress the brake
pedal and then press the Auto
Hold button. The white AUTO
HOLD indicator will come on and ...
Other information:
To move the front part of cushion forward:
1. Push the front part of control
switch to move the seat cushion to
the desired length.
2. Release the switch once the seat
cushion reaches the desired length.
To move the front part of cushion
rearward:
1. Push the rear part of control
swi ...
• Press the lens (1) to turn ON the
map lamp.
To turn the map lamp OFF press
the lens (1) again.
• (2) : DOOR mode
- The map lamp and room lamp
come on when a door is opened.
The lamps go out after approximately
30 seconds.
- The map lamp and room lamp
come on for approximate ...