Kia Cadenza: When the lane ahead is clear / In traffic situation
Use switch or pedal to accelerate
- In traffic, your vehicle will stop if the
vehicle ahead of you stops. Also, if
the vehicle ahead of you starts
moving, your vehicle will start as
well. However, if the vehicle stops
you must depress the accelerator
pedal or move up the RES+ switch
to start driving.
- If you move the smart cruise control
switch (RES+ or SET-) while
Auto Hold and smart cruise control
is operating the Auto Hold will be
released regardless of accelerator
pedal operation and the vehicle will
start to move. The AUTO HOLD
indicator changes from green to
white.
If there is a high risk of collision due
to sudden braking of the front vehicle
or lack of safety distance with the
vehicle ahead during SCC driving, so
that if the driver's brake or steerin ...
Front view camera
Front view camera is a sensor for
detecting lanes and the front vehicles.
If the sensor is covered with dirt,
snow or other foreign matter, the
sensor’s detection perform ...
Other information:
Removal
1.
Turn the ignition switch OFF.
2.
Remove the air duct (B) and air cleaner assembly (A).
3.
Remove the connector and then arrange the wiring harness (A).
4.
Remove the brake fluid from the master cylinder reservoir with a syringe.
•
Be ...
Description
BSD is a system that uses two magnetic wave radar sensors
attached on the rear bumper to measure the distance from the following
vehicles and provides the sensing and (visual and auditory) alarm of any
vehicle coming into the blind spot.
–
Blind Spot Detection (BSD) : ...