Other information:
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the IATS connector.
3.
Measure resistance between the IATS terminals 3 and 4.
4.
Check that the resistance is within the specification.
Specification: Refer to “Specification”
Removal
1.
Turn the ignition swit ...
Removal and Installation
VIS 1 [Intake Manifold]
1.
Disconnect the battery "-" terminal.
2.
Remove the engine cover.
3.
Disconnect the VIS actuator hose (A).
4.
Remove the VIS actuator (B).
Tightening torque :
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
5.
Insta ...