Kia Cadenza: IMS (Integrated Memory) / Specifications

Kia Cadenza YG 2016-2025 Service Manual / Body Electrical System / IMS (Integrated Memory) / Specifications

Specifications

IMS Electrical System

Item	Specification
Rating voltage	DC 12V
Operating voltage	DC 9V ~ 16V
Operating temperature	-30°C ~ +80°C
Maintaining temperature	-40°C ~ +85°C
Max, humid	95%
Consumption current	MAX 700mA
Dark current	Below 2mA

Motor Electrical System

Item	Specification
Rating voltage	13.5V (Slide, Recline, Front height, Rear height)
Current	Slide : 8A
	Recline : 8A
	Front height : 7.5A
	Rear height : 7.5A
At worst current	Slide : 24A
	Recline : 20A
	Front height : 25A
	Rear height : 27A

Mechanical System

Item	Specification
Type	Motor with hall IC
Duty ratio	50 ± 15
Total stroke	Slide : 240mm
	Recline : 63°
	Front height : 32mm (Motor)
	Rear height : 52mm (Motor)
Total pulse number	Slide : 899
	Recline : 1,136
	Front height : 333
	Rear height : 412
Moving speed (Terminal voltage : 13.5V)	Slide (Forward) : 17.9 mm /sec or more, Slide (Backward) : 20.2 mm /sec or more
	Recline : 3.5 °/ sec
	Front height : 7 mm / sec or more
	Rear height : 7 mm / sec or more

IMS (Integrated Memory)

...

Components and Components Location

Component Location 1. Seat Memory Unit (IMS)2. IMS control switch3. IMS driver power seat control ...

Other information:

Kia Cadenza YG 2016-2025 Service Manual: Description and Operation

Description Ignition timing is controlled by the electronic control ignition timing system. The standard reference ignition timing data for the engine operating conditions are pre-pro grammed in the memory of the ECM (Engine Control Module). The engine operating conditions (speed, load, wa ...

Kia Cadenza YG 2016-2025 Service Manual: Smart key Repair procedures

Smart Key Smart Key Code Saving 1. Connect the DLC cable of GDS to the data link connector in driver side crash pad lower panel, turn the power on GDS. 2. Select the vehicle model and then do "Smart key code saving". 3. After selecting "Smart key teaching" menu, push "Enter" key, then t ...