Kia Cadenza: Front seat adjustment - power / Storing positions into memory using the buttons on the door

Kia Cadenza YG 2016-2025 Owners Manual / Safety features of your vehicle / Seat / Front seat adjustment - power / Storing positions into memory using the buttons on the door

Storing driver’s seat positions

1. Shift the shift lever into P while the engine start/stop button is ON.

2. Adjust the driver’s seat and outside rearview mirror comfortable for the driver.

3. Press SET button on the control panel. The system will beep once.

4. Press one of the memory buttons (1 or 2) within 4 seconds after pressing the SET button. The system will beep twice when memory has been successfully stored.

When recalling an adjustment memory button while sitting in the vehicle, you can be surprised by the setting chosen if the memory has been adjusted by someone else. If that occurs, immediately push the seat position control knob in the direction of the desired position to stop further undesired movement.

Recalling positions from memory

1. Press the parking [P] button while the Engine Start/Stop button is ON .

2. To recall the position in the memory, press the desired memory button (1 or 2). The system will beep once, then the driver’s seat will automatically adjust to the stored position.

Adjusting the control switch for the driver’s seat while the system is recalling the stored position will cause the movement to stop and move in the direction that the control switch is moved.

Driver position memory system
A driver position memory system is provided to store and recall the driver seat and outside rearview mirror position with a simple button operation. By saving the desired position into the ...

Easy access function
The system will move the driver's seat automatically as follows: • With smart key system - It will move the driver’s seat rearward when the engine start/stop button is changed to the OFF ...

Other information:

Kia Cadenza YG 2016-2025 Owners Manual: Warning message


Rear camera error or blockage/ Parking sensor error or blockage This warning message may appear when : The rear view camera or the ultrasonic sensor(s) is blocked by dirt, snow, or a foreign object. There is inclement weather, such as heavy snow, rain, etc. If any of these c ...

Kia Cadenza YG 2016-2025 Service Manual: Rear Seat Repair procedures


Replacement Seat Assembly Replacement 1. Remove the rear seat cushion (A). 2. Disconnect the rear seat cushion heater connectors (A). 3. After loosening the mounting bolts, then remove the rear seat back (A). Tightening torque : 16.7 ~ 25.5N.m (1.7 ~ 2.6kgf.m, 12.3~18.8lb-ft) 4 ...

Copyright © www.kcadenzavg.com 2017-2025