Other information:
Removal
1.
Open the fuel filler door and then remove the filler-neck installation screw (A).
2.
Lift the vehicle.
3.
Remove the rear-LH wheel, tire, and the inner wheel house.
4.
Disconnect the fuel filler hose (A).
5.
Disconnect the ventilation hose (B) from the fuel tank air fi ...
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Turn the ignition switch ON.
3.
Measure the output voltage of the APS 1 and 2 at C.T and W.O.T.
Specification: Refer to “Specification”
Removal
1.
Turn the ignition switch OFF and disconnect the negative ( ...