Kia Cadenza: Specifications, Consumer information and
Reporting safety defects / Tire specification and pressure label
.gif)
The tires supplied on your new vehicle
are chosen to provide the best
performance for normal driving.
The tire label located on the driver's
side center pillar gives the tire pressures
recommended for your vehicle.
The vehicle certification label
attached on the driver’s side center
pillar gives the vehicle identification
number (VIN). ...
The engine number is stamped on
the engine block as shown in the
drawing. ...
Other information:
Description
BSD is a system that uses two magnetic wave radar sensors
attached on the rear bumper to measure the distance from the following
vehicles and provides the sensing and (visual and auditory) alarm of any
vehicle coming into the blind spot.
–
Blind Spot Detection (BSD) : ...
Checking the brake fluid level
Check the fluid level in the reservoir
periodically. The fluid level should be
between MAX (Maximum) and MIN
(Minimum) marks on the side of the
reservoir. Before removing the reservoir
cap and adding brake fluid, clean
the area around the reservoir cap
...