Kia Cadenza: Smart Cruise Control (SCC) / To convert to cruise control
mode
The driver may choose to only use
the cruise control mode (speed control
function) by doing as follows:
1. Turn Smart Cruise Control on (the
cruise indicator light will be on but
the system will not be activated).
2. Push the distance to distance
switch for more than 2 seconds.
3. Choose between "Smart Cruise
Control" and "Cruise Control".
When the system is canceled using
the CRUISE button or the CRUISE
button is used after the engine is
turned on, the Smart Cruise Control
mode will turn on.
WARNING
When using the cruise control
mode, you must manually
adjust the distance to other
vehicles as the system will not
automatically brake to slow
down for other vehicles.
The message will appear when the
headway control is not functioning
normally.
Take your vehicle to an authorized
Kia dealer and have the system
checked.
CAUTION
Do not install accessor ...
Smart Cruise Control may have limits
to its ability to detect distance to
the vehicle ahead due to road and
traffic conditions. ...
Other information:
Follow either of these procedures:
Move the SET- switch down and
hold it. Your vehicle set speed will
decrease by 5 mph (10 km/h).
Release the switch at the speed
you want.
Move the SET- switch down and
release it immediately. The cruising
speed will decrease by 1.0 mph
...
Inspection
1.
Disconnect the IMS control switch connector.
2.
With the power IMS control switch in each position, make sure
that continuity exists between the terminals below. If continuity is
not as specified, replace the IMS control switch.
Removal
1.
Disconnect the negative (-) b ...