1. Model Name
2. Maximum allowable load
3. When using the jack, set your
parking brake.
4. When using the jack, stop the
engine.
5. Do not get under a vehicle that is
supported by a ja ...
Other information:
Replacement
1.
Disconnect the damper (B) from the glove box (A) and then remove the glove box lift (C).
2.
Remove the filter cover (A) with pushing the knob.
3.
Replace the air filter (B), install it after making sure of the direction of air filter.
4.
Installation is the reverse ord ...
Inspection
1.
Check-points upon head lamp failure (HID)
(1)
Check the battery voltage. (Low beam will be on when the battery voltage above 9V.)
(2)
Check the fuse and relay.
(3)
Check the polarity of ballast. (If the polarity are changed, low beam doesn''t lighten)
(4)
Check the bu ...