Kia Cadenza: Detecting Sensor (front view
camera/front radar) / Warning message
When the sensor lens cover is
blocked with dirt, snow, or debris,
Smart Cruise Control operation may
stop temporarily. If this occurs, a
warning message will appear on the
LCD display. Remove any dirt, snow,
or debris and clean the radar sensor
lens cover before operating Smart
Cruise Control. Smart Cruise Control
may not properly activate, if the radar
is totally contaminated, or if any substance
is detected after turning ON
the engine (e.g. in an open terrain).
Front radar detects the distance to
the vehicle ahead.
If the sensor or sensor cover is covered
with dirt, snow or other foreign
matter, the sensor’s detection performance
will be degrade ...
The message will appear when the
headway control is not functioning
normally.
Take your vehicle to an authorized
Kia dealer and have the system
checked.
CAUTION
Do not install accessor ...
Other information:
Replacement
1.
Disconnect the negative (-) battery cable.
2.
Remove the glove box housing.
(Refer to Body - "Glove Box Housing")
3.
Disconnect the connector.
4.
Remove the bracket and receiver (A) as loosen the nut.
Tightening torque :
3.9 ~ 5.9N.m (0.4 ~ 0.6kgf.m, 2.9 ~ 4.3l ...
System Block Diagram
Component Parts And Function Outline
Component partFunctionVehicle-speed sensorConverts vehicle speed to pulse.ECMReceives signals from sensor and control switches.Cruise control indicatorIlluminate when CRUISE main switch is ON (Built into cluster)Cruise Control switchesC ...