Other information:
Removal
1.
Open the fuel filler door and then remove the filler-neck installation screw (A).
2.
Lift the vehicle.
3.
Remove the rear-LH wheel, tire, and the inner wheel house.
4.
Disconnect the fuel filler hose (A).
5.
Disconnect the ventilation hose (B) from the fuel tank air fi ...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the ECTS connector.
3.
Remove the ECTS (Refer to "Removal").
4.
After immersing the thermistor of the sensor into engine coolant, measure resistance between the ECTS terminals 3 and 4.
5.
Check that the resistance is withi ...