Kia Cadenza: Front seat adjustment - power / Seat height

Pull the front portion of the control
switch up to raise or press down to
lower the front part of the seat cushion.
Pull the rear portion of the control
switch up to raise or press down
to lower the seat cushion. Release
the switch once the seat reaches the
desired position.
Push the control switch forward or
backward to move the seatback to
the desired angle. Release the
switch once the seat reaches the
desired position. ...
The lumbar support can be adjusted
by pressing the lumbar support
switch on the side of the seat.
Type A (for driver's seat & passenger's
seat)
1. Press the front portion of the
switch ...
Other information:
Removal
[Knock Sensor #1 (Bank 1)]
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the knock sensor connector (A).
3.
Remove the intake manifold.
(Refer to Engine Mechanical System - "Intake Manifold")
4.
Remove the installation bolt ...
Inspection
First Seat Heater
1.
Check for continuity and measure the resistance between No.1 and NO.4 terminals.
No.DescriptionNo.Description1Heater (-)3NTC (+)2NTC (-)4Heater (+)
Standard value (Fabric / Leather)
Cushion : 1.04 Ω ± 10%
Back : 1.1 Ω ± 10%
Set : 2.14 Ω ± 10%
...