Kia Cadenza: ENGINE START/STOP button / Starting the engine with a
smart key
1.Carry the smart key or place it
inside the vehicle.
2.Make sure the parking brake is
firmly applied
3.Place the shift lever in P (Park).
Depress the brake pedal fully.
You can also start the engine when
the shift lever is in the N (Neutral)
position.
4.Press the ENGINE START/STOP
button while depressing the brake
pedal.
No need to depress the accelerator
pedal
5.Do not wait for the engine to warm
up while the vehicle remains stationary.
Start driving at moderate engine
speeds. (Steep accelerating and
decelerating should be avoided.)
- Even if the smart key is in the vehicle,
if it is position far away from
you, the engine may not start.
- When the ENGINE START/STOP
button is in the ACC or ON position
and any door is opened, the system
checks for the presents of the
smart key. If the smart key is not in
the vehicle, a message "key is not
in the vehicle" will appear on the
LCD display. And if all doors are
closed, the chime will sound for 5
seconds. The indicator or warning
will turn off while the vehicle is
moving. Always have the smart key
with you.
WARNING - Unintended
vehicle movement
Never leave the smart key in the
vehicle with children or vehicle
occupants who are unfamiliar
with the vehicle operation.
Pushing the ENGINE
START/STOP button while the
smart key is in the vehicle may
result in unintended engine
activation and/or unintended
vehicle movement.
.jpg)
- If the smart key battery is weak or
the smart key does not work correctly,
you can start the engine by
pressing the engine start/stop button
with the smart key.
The side with the lock button
should contact the engine
start/stop button directly.
When you press the engine
start/stop button directly with the
smart key, the smart key should
contact the button at a right angle.
- When the stop lamp fuse is blown,
you can't start the engine normally.
Replace the fuse with a new one. If
it is not possible, you can start the
engine by pressing the ENGINE
START/STOP button for 10 seconds
while it is in the ACC position.
The engine can start without
depressing the brake pedal. But for
your safety always depress the
brake pedal before starting the
engine.
Do not press the ENGINE START/
STOP button for more than 10 seconds
except when the stop lamp fuse
is blown.
OFF
To turn off the engine (START/RUN
position) or vehicle power (ON position),
press the ENGINE
START/STOP button with the shift
lever in the P (Park) position. When
you press the ENGINE
...
Other information:
Description
According to driving environment and loading state of
vehicle, head lamp lighting direction is changed to keep the driver''s
visibility range and to protect the driver''s vision from glare, aiming
at safety driving.
Sensor mounting on the rear center arm drives the actuator
...
Check your tires once a month or
more.
Also, check the tire pressure of the
spare tire.
How to check
Use a good quality gauge to check
tire pressure. You can not tell if your
tires are properly inflated simply by
looking at them. Radial tires may
look properly inflated even when
the ...