Kia Cadenza: Driver Attention Warning (DAW) / System standby
.jpg)
Driver Attention Warning enters the
ready status and displays the
‘Standby’ screen in the following situations.
- Driving speed remains over 110
mph (180 km/h).
The last break time is set to 00:00
and the driver's attention level is
set to 5 (very attentive) when the
driver resets the Inattentive driving
warning function.
Inattentive driving ...
When the “Check Driver Attention
Warning (DAW) system” warning
message appears, the system is not
working properly. In this case, take
your vehicle to an authorized Kia
dealer and have ...
Other information:
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear bumper cover.
(Refer to Body - "Rear Bumper Cover")
3.
Disconnect the connector (A) from the parking assist sensor.
4.
Pull out the sensor (A) by opening the sensor holder (B) out.
Installation
1.
Insta ...
Inspection
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the fuel pressure regulator valve connector.
3.
Measure resistance between the fuel pressure regulator valve terminals 1 and 2.
4.
Check that the resistance is within the specifica ...