Kia Cadenza: Features of your vehicle / Windshield defrosting and defogging
WARNING - Windshield
heating
Do not use the
or
position
during cooling operation in
extremely humid weather. The
difference between the temperature
of the outside air and the
windshield could cause the
outer surface of the windshield
to fog up, causing loss of visibility.
In this case, set the mode
selection to the
position
and fan speed control to the
lower speed.
- For maximum defrosting, set the
temperature control to the extreme
right/hot position and the fan speed
control to the highest speed.
- If warm air to the floor is desired
while defrosting or defogging, set
the mode to the floor-defrost position.
- Before driving, clear all snow and
ice from the windshield, rear window,
outside rear view mirrors, and
all side windows.
- Clear all snow and ice from the
hood and air inlet in the cowl grill to
improve heater and defroster efficiency
and to reduce the probability
of fogging up the inside of the
windshield.
When the amount of refrigerant is
low, the performance of the air conditioning
is reduced. Overfilling also
has a negative influence on the air
conditioning system.
Therefore, if abnormal ope ...
To defog inside windshield
1. Set the fan speed to the desired
position.
2. Select desired temperature.
3. Press the defroster button ().
4. The outside (fresh) air position will
be selected ...
Other information:
Refrigerant System Service Basics
Refrigerant Recovery
Use only service equipment that is U.L-listed and is
certified to meet the requirements of SAE J2210 to remove
HFC-134a(R-134a) from the air conditioning system.
–
Air conditioning refrigerant or l ...
Components
1. Front pillar trim2. Center pillar upper trim3. Center pillar lower trim4. Rear pillar trim5. Cowl side trim6. Front door scuff trim7. Rear door scuff trim8. Rear package tray trim
...