Other information:
Inspection
1.
Turn ignition switch OFF.
2.
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
3.
Disconnect the solenoid valve connector (A).
4.
Measure the resistance between power terminal (10) and signal terminal (7).
Specification : 5.1 ± ...
Pressing or pulling up the power window
switch momentarily to the second
detent position (6) completely lowers
or raises the window even when the
switch is released. To stop the window
at the desired position while the window
is in operation, pull up or press
down and release the swi ...