Kia Cadenza: Automatic climate control system / Manual heating and air conditioning
The heating and cooling system can
be controlled manually by pressing
buttons or turning knob(s) other than
the AUTO button. In this case, the
system works sequentially according
to the order of buttons or knob(s)
selected.
1. Start the engine.
2. Set the mode to the desired position.
For improving the effectiveness of
heating and cooling;
- Heating:
- Cooling: .gif)
3. Set the temperature control to the
desired position.
4. Set the air intake control to the
outside (fresh) air position.
5. Set the fan speed control to the
desired speed.
6. If air conditioning is desired, turn
the air conditioning system on.
1. Press the AUTO button. The
modes, fan speeds, air intake and
air-conditioning will be controlled
automatically by setting the temperature.
2. Turn the temperature control button
to the ...
The mode selection button controls
the direction of the air flow through
the ventilation system.
The air flow outlet port is converted
as follows:
Air flow is directed toward the upper ...
Other information:
Special Service Tools
Tool (Number and name)IllustrationUseCrankshaft front oil seal installer(09231-3C100)Installation of the front oil sealRing gear stopper(09231-2B100)Removal and installation of crankshaft pulley boltRing gear stopperA : (09231-3D100)B : (09231-2W100)Removal and installatio ...
General Service Information
Protection Of The Vehicle
Always be sure to cover fenders, seats, and floor areas before starting work.
The support rod must be inserted into the hole near the edge
of the hood whenever you inspect the engine compartment to prevent the ...