Kia Cadenza: Electronic Parking Brake
(EPB) / System warning
- If you try to drive off by depressing
the accelerator pedal with the EPB
applied, but the EPB doesn't
release automatically, a warning
will sound and a message will
appear.
- If the driver's seat belt is not fastened
and the engine hood, driver's
door or trunk is opened, a warning
will sound and a message will
appear.
- If there is a problem with the vehicle,
a warning may sound and a
message may appear.
If the above situation occurs, depress
the brake pedal and release EPB by
pressing the EPB switch.
WARNING
- To prevent unintentional
movement when stopped and
leaving the vehicle, do not use
the shift lever in place of the
parking brake. Set the parking
brake and make sure the shift
lever is securely positioned in
P (Park).
- Never allow anyone who is
unfamiliar with the vehicle to
touch the parking brake. If the
parking brake is released
unintentionally, serious injury
may occur.
- All vehicles should always
have the parking brake fully
engaged when parking to
avoid inadvertent movement
of the car which can injure
occupants or pedestrians.
CAUTION
- A click or electric brake motor
whine sound may be heard
while operating or releasing the
EPB, but these conditions are
normal and indicate that the
EPB is functioning properly.
- When leaving your keys with a
parking lot attendant or valet,
make sure to inform him/her
how to operate the EPB.
- The EPB may malfunction if
you drive with the EPB applied.
- When you automatically
release EPB by depressing
the accelerator pedal, depress
it slowly.
To release the EPB (Electronic
Parking Brake), press the EPB switch
while doing the following:
1. Place the ENGINE START/STOP
button in the ON position.
2. Press the brake pedal.
3. The shi ...
When the conversion from Auto Hold
to EPB is not working properly a
warning will sound and a message
will appear.
CAUTION
Engage the brake pedal when
the above message appears for
the Au ...
Other information:
Front view camera
The front view camera is a sensor
detecting the lane. If the front view
camera is covered by heavy rain,
heavy snow and fog or foreign
objects, dust, the system may temporarily
be cancelled and not work
properly until the cancellation due to
the degradation of the ...
On-vehicle Inspection
Inspect ignition coil assembly and Perform spark test
1.
Check for DTCs.
•
If a DTC is present, perform troubleshooting in accordance with the procedure for that DTC.
(Refer to DTC guide)
2.
Check if sparks occur.
(1)
Re ...