Transaxle Control Module (TCM) is the automatic transaxle''s
brain. The module receives and processes signals from various sensors
and implements a wide range of transaxle controls to ensure optimal
driving conditions for the driver. TCM is programmed for optimal
response to any on-road situation. In the event of a transaxle failure
or malfunction, TCM stores the fault information in memory so that the
technician may reference the code and quickly repair the transaxle.
Functions
•
Monitors the vehicle''s operating conditions to determine the optimal gear setting.
•
Performs a gear change if the current gear setting differs from the identified optimal gear setting.
•
Determines the need for Damper Clutch (D/C) activation and engages the clutch accordingly.
•
Calculates the optimal line pressure level by constantly monitoring the torque level and adjusts the pressure accordingly.
•
Diagnoses the automatic transaxle for faults and failures.
1. TCM connector and terminal function
2. TCM terminal function
Connector [A]
PinDescriptionPinDescription1-45Inhibitor switch signal ''S2''2-46Inhibitor switch signal ''S3''3-47Inhibitor swi ...
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad")
3.
Disconnect the 6P connector (B) of the coil antenna and then remove the coil antenna (A) after loosening the screw.
Installation
1.
Install the coil antenn ...
Removal
1.
Remove the transaxle assembly.
(Refer to Automatic Transaxle System - "Automatic Transaxle")
2.
Remove the drive plate.
(Refer to Cylinder Block - "Drive Plate")
3.
Remove the rear oil seal (A).
4.
Remove the rear oil seal case (A).
Installation
1.
Install the rear ...